Add Plast T is organic compound acts as a multifunctional processing aid. Derived from complex esters, long chain alcohol & fatty acids derivatives, good hydrophobic nature can able to provide excellent
dispersion, better release properties & modify flow during the process with carrier resin filler, pigment & any additives.
Add Plast T having low melting functional additive can perform at low addition impart to increase higher filler loading, better coupling & improves mechanical properties, appearance advantages are evident in end product.
Typical Properties
Properties
Units
Add Plast T
Appearance
Beads/ Flake
Colour
Slight Yellow
Melting Range
°C
60±5
Density
Gm/Lit
0.92
Brookfield Viscosity @ 100°C
cps
110
Advantages: Eliminate all conventional lubricants & used as a one pack form Minimise water carry in tape plant Reduce degradation & restrict plate out during the process Homogeneous dispersions prevent melt fracture during the high shear extrusion
Use Level: 0.4-0.7% used in coated fillers & 1.2-1.5% recommended for uncoated fillers however optimum performance level depends on
polymer/filler ratio & hardware conditions
Standard Packing: 25 Kgs. HDPE woven sack bags
Storage Conditions: Keep in cool, dry & ventilated conditions
Eliminate all conventional lubricants & used as a one pack form